Unical INOXIA GJ Series, Installation And Servicing Manual

Page: 44 / 56

44
Instructions for the installer
20 - 500K DYNAMIC BOILERS DESCENDANT 20K
5 - 500 TIME READJUSTMENT 50
0% - 100% INDEX MODULATION ON 80%
0% - 100% INDEX MODULATION OFF 50%
0% - 100% INDEX MODULATION MIN 0%
40% - 100% POWER INDEX MODULATION 80%
---- BOILER SERIES 1 ° 12345678
----
BOILER SERIES 2 ° 87654321
Default Personal values Value range Designation
10 - 800 hours
CHANGE SEQUENCE
200 hours
00 min - 30 min CYCLE BLOCK 00 min
00 - 01
BOILER COOLING
00
30°C - 120°C COOLING TEMPERATURE. BOILER 95
00 - 06
TYPE 1 CIRCUIT 05
01 - 03
TANK CIRCUIT 2
01 - 01 - 02 PUFFER TYPE
00, 01 (OFF - ON)
SCREED
00
00
00 OFF
00 - 04 CIRCUIT 1 BUS 04
00 - 05 TYPE 2 CIRCUIT 00
** see notes SCREED PROGRAM
2K - 20K HYSTERESIS 2 ° BURNER 2K
01 - 06 SEQUENCE MODE 01
* Set the value of the first stage and the second stage of the first boiler 1.
Set the value of the first stage and the second stage of the second boiler 1.
In the case of more than 2 boilers in cascade to enable the early stages and second stages of the boilers in cascade.
** See instruction manual controller E8.5064
Default Personal values Value range Designation
DOMESTIC HOT WATER PRODUCTION
00 - 01 (OFF / ON) CHARGE PUMP 01 (ON)
00 , 01, 02, 03 PARALLEL PUMP OPERATION 01
00K - 50K T AC 20K
5K - 30K AC HYSTERESIS 5 degrees
00 min - 30 min DELAY AC 00 min
00, 01 (OFF / ON) INLET THERMOSTAT 00 OFF
00, 01 (OFF / ON) FUNC. THERMOSTAT 00 OFF
Exit level using
BACK
00, 01 (OFF / ON) LOADING 00 OFF
Default Personal values Value range Designation
HEATING CIRCUIT 1
00 - 04 CIRCUIT OPERATION 0
00 - 03 PUMP OPERATION 0
5 - 25
MIXER OPEN ----
5 - 25 MIXER CLOSED ----