7
General information
ENGLISH
1.6 - TECHNICAL DATA PLATE
KEY:
1 = CE monitoring body
2 = Type of boiler
3 = Boiler model
4 = Number of stars (directive 92/42 EEC)
5 = (S.N°) Serial Number
6 = P.I.N. Product Identification Number
7 = Types of approved flue gas exhaust configurations
8 = (NOx) NOx Class
A = Heating circuit characteristics
9 = (Pn) Effective nominal output
10 = (Pcond) Effective output in condensation
11 = (Qn) Maximum heat output
12 = (Adjusted Qn) Adjusted for rated heat output
13 = (PMS) Max. heating operating pressure
14 = (T max) Max. heating temperature
B = Domestic hot water circuit characteristics
15 = (Qnw) Rated heat output in domestic hot water function (if different to
Qn)
16 = (D) Specific D.H.W. flow rate according to EN 625 - EN 13203-1
17 = (R factor) No. of taps according to the declared amount of water (EN
13203-1)
18 = (F factor) No. of stars according to the declared quality of the water
(EN 13203-1)
19 = (PMW) Max. domestic hot water operating pressure
20 = (T max) Max. domestic hot water temperature
C = Eletrical characteristics
21 = Electrical power supply
22 = Consumption
23 = Protection rating
D = Countries of destination
24 = Direct and indirect countries of destination
25 = Gas category
26 = Supply pressure
E = Factory settings
27 = Adjusted for gas type X
28 = Space for national brands
G = ErP
29 = Seasonal space heating energy efficiency
30 = Energy efficiency in DHW production mode
/
The CE marking
certifies the compliance of the equipment with the essential
safety requirements defined in the directives and applicable
European regulations and that its functioning satisfy applicable
technical standards.
The CE marking is affixed to each piece of equipment with an
appropriate label.
The CE declaration of conformity issued in accordance with
international standards by the manufacturer, is placed in docu-
mentation envelope supplied with the product.
