Unical 001104, Instruction Manual

Page: 2 / 8

2
EN
Button functions guide
The radio control is able to receive and send signals to the main board, therefore
it is also able to function as a room thermostat by detecting the temperature of
the room in which it is positioned and send it to the stove.
To send the exact room temperature to the board, it is recommended to place it
away from heat sources.
•
From the remote control it is possible to program the desired temperature, the working
power and the automatic on and off timers. To operate, it must be powered by 3 AAA
batteries (not supplied).
•
In the event of a radio control failure, the stove can be
operated in Auto mode by pressing the On/Off button
on the receiver located on the back of the stove.
The stove will automatically set to the same power and
temperature conditions as the last operation and will
independently adjust working power to meet these
conditions.
Radio control and receiver
Setting
- Room temperature
- Forward (+)
Day - time
State
Room temperature
Setting
Go back to
the previous menu
Setting
Confi rm
selection / function
Setting
- Stove power
- Back (−)
ON /OFF
DISPLAY
CONTROLS
27° C
OFF
Tu 11:55