background image

Stella di Caffè 

USER GUIDE

 

 

 

 

3

 

 

Safety advices 

 

-  This appliance is not intended for use by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety. 

 

-  Children should be supervised to ensure that they do not play with the appliance. 

 

-  This appliance is intended to be used only for its specific purpose. 

The manufacturer shall not accept any liability for damages due to improper or wrong use.  

 

-  Access to the service area is restricted to persons having safety and hygiene knowledge 

with practical experience of the appliance. 

 

-  Before plugging in or unplugging the power cord, place the main switch to position “0”. 

 

-  If the power cord is damaged, it must be replaced by the manufacturer, its service agent or 

similar qualified persons in order to avoid a hazard. 

 

-  For electrical safety, be sure the appliance is correctly earthed. 

The manufacturer shall not accept any liability for damage due to faulty earth. 
 

-  Only a qualified technician is allowed to access the internal parts of the appliance for 

maintenance and service operation. 

 

-  Be careful of hot surfaces such as: cup warmer, group heads, hot water and steam outlets. 

 

-  Do not expose oneself to steam or hot water flow. 

 

Important notes 

 

-  This appliance is intended to be: 

ƒ

  Placed on an horizontal and stable surface 

ƒ

  Used in an ambient temperature between 5°C and 35°C (41°F – 95°F). 

ƒ

  Installed to comply with the national rules that may be applicable. 

ƒ

  Connected to a water system with pressure ranging from 1 to 8 bar  

(0.1 to 0.8 Mega pascal) 

 

-  Before connecting the electrical supply, verify that the electrical network comply with the 

data plate of the appliance. 

 

-  For more details about installation, adjustments and connections, please refer to the 

installation guide or the technician guide. 

 

-  This appliance must not be exposed to water jet or splash.  

 

-  Be careful not to block the air inlets with towels or other items. 

 

-  If the appliance as to be stored with ambient temperature less than 5°C (41°F), the water 

circuit (boiler – pipes) should be emptied. 

 

Summary of Contents for Stella di Caffe





























Reviews: