48
How to use > Press MENU -
> ‘Setup’
-
> ‘Service Searching’
->
‘Manual Scan’
If you know well enough to configure each exact setting required for manual search of services, you can do manual
scan as well. There are many parameter values that you need to decide as below.
Amongst other things, the below parameters are what you need to decide prior to performing manual scan.
①
Tuner: You need to decide which tuner you want to use for manual scan.
②
System: Here you have two options between DVB-S (SD) and DVB-S2 (HD).
③
Frequency: You need to enter the exact frequency of the transponder that you want to scan.
④
Symbol Rate: You need to enter the exact symbol rate of the transponder that you want to scan.
⑤
Polarity: Here, you have options for Horizontal, Vertical, Circular Left and Circular Right.
You need to know the polarity of the transponder that you want to scan.
⑥
FEC (Forward Error Correction): You need to enter the exact FEC value of the transponder that you want to scan.
⑦
Modulation: Here you have two options for QPSK (SD) and 8PSK (HD).
⑧
Network Scan: Here you have two options for YES and NO. NO is used to scan the transponder (TP) based on
the data that your UNIBOX HD ECO+ currently has. YES is used to scan the TP not just based on the existing TP
data but also using new TP data, if there is TP
data newly transported from the TP. Naturally, YES option takes longer while it may results in a better scan result.
⑨
Clear Before Scan: YES is used when you want to delete the existing channel list before you start the automatic
scan. If you want to keep the existing list, select NO.
⑩
Only Free Scan: Here you have two options for YES and NO. You want to scan only Free to Air channels without
any encryption, select YES. Otherwise, select NO to scan all FTA and CAS channels.
Press OK to activate the manual scan. This will take some minutes. As the scan proceeds, you will see the
progressive bar and the newly found services underneath.
5.3.3. Checking CAM
How to use > Press MENU ->
‘Setup’
->
‘Common Interface’
To be able to watch CAS channels, you need to have a proper CAM and a Smartcard. UNIBOX HD ECO+ is
integrated with two Common Interface slots. If you have two CAM modules and keep them inserted in your UNIBOX
HD ECO+, it will reduce the trouble of changing CAM.
If you have inserted one or two CAMs, you can check the information of the inserted CAMs, through this menu as
below:
