8
I
PowerSuite 2010 Help Manual www.uniblue.com
3.2.3 Ignoring drivers
If you decide not to install a driver for safety reasons, you might want to omit this driver from subsequent
scan results. To do this, go to the
Driver Scan
page from the navigation panel. From the left hand side
menu, select
Update drivers.
You will find a list of downloaded drivers. To omit a driver from the next
search results, click on the
Ignore
option from the right hand side.
Ignored drivers can be retrieved. To unignore a driver, select the
Manage
tab from the navigation panel and
then
Ignored drivers
from the left hand side menu. Select the appropriate driver by clicking the tickbox on
the left hand side. An
Unignore selected
button should turn blue. Click on the
Unignore selected
button
and the driver will be offered once again in subsequent scan results.
3.2.4 Rolling back to a previous driver
Every time you install a new driver, DriverScanner keeps a restore point. This is a snapshot of your system
that you can resort to in case of system problems.
To roll back to a restore point, click on the
Manage tab
from the navigation panel. Select
Restore
from the
left hand side menu. Any restore points will be listed together with the date and time that they were set.
To rollback to your computer at a previous state, select the appropriate restore point by clicking on the left
hand side tickbox.
Once selected, a
Restore
selected
button should change color from grey to blue. Click on the Restore
selected button. To complete the rollback you will need to restart your computer.
Note: Rolling back to a restore point will undo any changes made to your computer since the restore point
was set.
3.3
SpeedUpMyPC
DriverScanner scans your computer to provide a list of drivers that need to be updated. With single click
convenience, DriverScanner will then install each driver update on your PC.
To update a driver, DriverScanner must be guided through a three part process:
1. System scan
2. Driver download
3. Driver installation
3.31 Speeding up your PC
After scanning through PowerSuite, click the SpeedUpMyPC Launch Application and the program will launch
straight in the Scan results page within the Speed scan tab.
By default, if you click on the Speed up now button, SpeedUpMyPC will conduct a full system speed up,
implementing speed tools and system tweaks as well as cleaning junk files (for information on system
optimization go to section 3.4).
3.3.2 Conducting a selective speed up
You can choose to omit certain fixes from the speed up process, either by excluding a major category from the
scan process or by deselecting individual fixes from the scan results. To omit a major category from the scan
