UNIA TERIS XL H Series, Operating And Maintenance Manual

Page: 8 / 30

OPERATING AND MAINTENANCE MANUAL TERIS XLH / TERIS XXLH
- 6 -
•
When driving on highways with the machine attached, lock the operating lever against its
lowering!
•
The attached warning and indicating signs contain information on safe work: they are
intended for your safety!
•
Before you start work, learn thoroughly operation of all devices and actuators and functions
of the machine. It is too late for this after you start work!
•
Avoid wearing any loose clothing, which could be caught by rotating components of the
machine.
•
Always keep the machine clean in order to reduce the danger of fire!
•
Always check the surroundings before you start operation. Make sure that you have
sufficient visibility!!
•
Never back or reverse the tractor when the machine is lowered to the working position.
When reversing, pay attention to the components that protrude far away and do not use the
independent brakes of the tractor!
•
Check air pressure in the wheels of the tractor and the machine regularly.
•
Never transport people on the machine and load it with any additional weights when
operating the machine or transporting it!
•
Check and attach the traffic equipment, such as lighting, warning devices and possible
protective devices.
•
Observe the admissible axial loads, total weights and transport dimensions.
•
Check tightness of screws and nuts on regular basis and tighten them if required.
•
Always use appropriate tools and wear safety gloves when changing tools.
•
The spare parts must be conforming to the revisions specified by the manufacturer. This may
only be provided by the genuine spare parts. Use typical protection devices and pins for
securing all bolts of the machines (t machine). Never use any temporary means of
protection, such as screws, bars, and wires etc., which can cause damage to the machine or
tractor during transport and cause a safety hazard for other road users!
•
Attach and disconnect the machine to/from the tractor after having parked the machine on a
flat and hardened surface and with the tractor engine stopped. Store the machines unfolded.
•
Store the machine in the locations inaccessible for unauthorized people or animals when not
in use.
•
Besides the above guidelines, follow the general safety rules.
1.3 Servicing
•
Service the machine when it is lowered onto the ground! If the machine is coupled
with the tractor, engine of the tractor must be off and brakes on!
• Use only tools in good technical condition and genuine materials and spare parts for servicing.
• Always protect the machine with appropriate supports when performing any maintenance or
repair work on the machine lifted up.