UNIA MAX T Series, Operating And Maintenance Manual

Page: 19 / 30

OPERATING AND MAINTENANCE MANUAL MAX / MAX T
- 17 -
3.4 Access to the Field – Transport
• Width of the machine can exceed 3.0m depending on the accessories,
• For transport, side sections of
MAX, MAX T
– 4.0; 4.5; 6.0; 7.5; and 9.0m units should be folded
into their transport positions by means of the hydraulic system [1] (+chassis hydraulics (in the
semi-mounted version)), and then the outermost frames must be secured against unfolding with
the help of the mechanical transport lock cable,
•
The bolt [A] is used to adjust the position of the folded arms. In order to adjust the position
properly, loosen the lock-nut, then set the screw [A] position and tighten the lock-nut,
•
In MAX T 3.0; 4.5; 6.0; 7.5; and 9,0m cultivation units, fold the coulter disc beam extensions into
their transport position and secure them with the bolts before transport! See par. 3.5.4. below,
• after adjusting the position of the arms, set the length of the mechanical lock. To do this, loosen
the nut
[B] , set the length by turning the turnbuckle [C] and tighten the nut [B] . Secure the
adjusted lock with a bolt [D],
• Clean the machine from soil and other debris after finishing work,
• Clean the warning components (lighting) [2] (optional accessories) from dirt
• Warning plates with lighting [2] should be dismantled for work in the field, so that they will not
be damaged,
•
A unit consisting of a tractor and agricultural machine connected to it must meet the same
requirements as the tractor alone,
• Adjust the chains tensioning the side links (stabilizer arms) of the tractor accordingly before
driving; they should limit the excessive side movements of the machine
• Observe the ‘Road Traffic Law’ regulations when driving on highways.
Fig. 8. Transport – MAX / MAX T – folding
Fig. 9. Transport – MAX / MAX T- securing the machine