14
Fig. 8-1
6.3.
Connection of Hydraulic Hoses
Safety instructions
Warning
The oil in the hydraulic system is under high pressure.
When connecting the hydraulic hoses of the machine to the tractor’s hydraulic system, ensure that
it is depressurized.
Release the overpressure and stop the tractor engine before connecting the hydraulic hoses to the
tractor
.
The hydraulic hoses must not be bent or damaged.
Check that the quick couplers of the hydraulic hoses fit properly;
otherwise install the correct ones.
With functional hydraulic connections of the tractor and attachment, sockets and plugs should be
marked to avoid wrong connections! Shifting the connections leads to the function being reversed
(e.g. lifting/lowering.)
Remember!
We recommend replacement of the machine hydraulic hoses after 5 years of use.
6.4.
Lubrication
Safety instructions
Caution
1.
Always wear appropriate protective clothing when working with oils and greases
2.
Protect your skin against contact with
oils and greases
3.
Never wash your hands with used oil or grease! They usually contain metal particles that can
hurt your hands, and the oil can also deepen and infect cuts
4.
Read leaflets and safety instructions on lubricants
5.
Most synthetic oils have corros
ive properties and cause severe skin irritation
6.
Contact your doctor immediately, if oil or grease causes skin irritation
7.
If oil spills onto the ground, prevent it from spreading. Collect the oil with a cloth. Handle
the collected oil in accordance with the applicable regulations on environmental protection
and waste management
Summary of Contents for HERMES 3.0
Page 2: ...2 ...
Page 22: ...22 UWAGI I NOTATKI ...
