OPERATING AND MAINTENANCE MANUAL CROSS HP
- 19 -
3.5.4. Adjustment of Folding
Fig. 13:
Adjustment of the folding hydraulics
•
The cylinders [A] for folding have a threaded eye that allows adjustment of the cylinder
length.
•
Screw the eye in (i.e. shorten the cylinder) of max -5mm in order to level the frame, if it is set
too low.
•
Screw the eye out (i.e. extend the cylinder) of max 15mm in order to level the frame, if it is
set too high.
•
Block any flow in the hydraulic system after unfolding the machine and before beginning
work using the valve [B] on each of 4 cylinders.
•
Unfolded side frames should hang below the middle frame of approx. 2-5°.
