UNIA Ares HP, Operating And Maintenance Manual

Page: 22 / 28

OPERATING AND MAINTENANCE MANUAL ARES HP
- 20 -
4.5. Lighting
• Check the correct connection of the 7-pin plug outputs before the first start.
• Check the lighting, plug, wiring and lamps every day.
•
Check cleanliness of the reflector plates.
4.6 Lubrication
• Use mineral oils for lubrication. Clean the lubrication points before lubricant injection.
Lubricate at the marked points.
Fig.:16 Lubrication points in ARES HP
Lubrication point
Item Designation Specification
Lubricant grade
Lubrication
interval (h)
1 A Roller bearings ŁT -4S-3 grease 20
2 B Chassis wheel hub -II- 200
3 C Support wheel hub -II- 100
4 D Axle pins -II- 50
5 E Cylinders -II- 200
• If the machine operation life is shorter than specified for it, lubricate the machine once a
year.