5.3 Point Temperature
1. Press the SET button to open the main menu.
2. Press the left/right button to select the option.
3. Press the SET button to enter the Point Temperature menu.
4. Press the up/down button to select the desired point.
A. Press the SET button to turn on the point and enter the thermal imaging
page.
Press the left/right/up/down button to move the point.
Press the SET button to confirm and read the temperature of the current
point.
B. Press the SET button to turn off the point.
Press the back button to exit.
5.4 Image Mode
UTi260K User Manual
UTi260K User Manual
1. Press the SET button to open the main menu.
2. Press the left/right button to select the option.
3. Press the SET button to enter the Image Mode menu.
4. Press the up/down button to select the desired mode from Thermal (infrared
image), Digital (visual light image), Fusion (image blending), and PIP (picture
in picture).
5. Press the SET button to apply the current mode.
6. Press the back button to exit.
Note: If Fusion is selected, users can press the left/right button to select the
desired blending ratio from 0% (pure visual light image), 25%, 50%, 75%, and
100% (pure infrared image) under the thermal imaging page. If Alignment
Distance is selected, users can set the alignment distance (meter) of the fusion
target to 0.5, 1.0 (default), 1.5, 2.0, 2.5 or >3.0.
10
9
