6.2 Image Viewing
1. Press the replay button to enter the gallery interface.
2. Use the up/down/left/right button to select the desired image.
3. Press the SET button to view the image in full screen mode.
4. Press the SET button in full screen mode to delete the image or view its
information.
Note: Do not remove or insert the SD card in viewing images.
6.3 Temperature Compensation and Calibration
UTi220K User Manual
UTi220K User Manual
To adapt to different environments and places, manual temperature compensation
is available. For the specific setting method, please refer to 5.5.5 Measurements.
To improve the stability of temperature measurement, manual temperature
calibration can be performed. Calibration method: Press the back button on the
main measurement interface.
6.4 LED Light
Press and hold the flashlight button for 3 seconds to turn on/off the LED light.
When the temperature alert is on and the measured temperature exceeds the
set temperature range, the LED light will flash.
Note: When the LED light is on, please do not point to the eyes of people or
animals.
6.5 USB Communication and Image Projection
1. Download and install the PC software (refer to UNI-T Documents Download
Operation Guide).
2. Connect the USB cable to the PC.
3. Set the USB mode to USB Disk to browse pictures and analyze data through
the PC software; set the USB mode to USB Camera to realize real-time image
projection through the PC software.
6.6 SD Card
This device supports Micro SD card (TF card) to store images. To avoid affecting
the operating speed of the device, please copy the backup data regularly and
clean up the SD card in time. To avoid causing abnormal data on the SD card,
do not insert or remove the SD card repeatedly. Try to remove and insert the
SD card when the device is turned off.
6.7 Charging
Please use a safety-certified 5V/1A or 5V/2A power adapter for charging. Do
not turn off the product easily during charging. If shutdown or restart is needed,
please unplug the Type-C power cord and disconnect the power supply first.
20
19
