l
In the autorange mode, the Meter selects the best range for
input signals.
This allows you to switch test points without having to reset
the range.
l
In the manual range mode, you may select the range.
This allows you to override autorange and lock the Meter in a
specific range.
The Meter defaults to the autorange mode in measurement
functions that have more than one range. When the Meter is in
the autorange mode,
To enter and exit the manual range mode:
1. Press
RANGE
.
The Meter enters the manual range mode and
turns off.
Each presses of
RANGE
increments the range. When the
highest range is reached, The Meter wraps to the lowest
range.
Measurement Ranges (2)
Note
l
If you manually change the measurement range after entering
the REL or Hold recording modes, the Meter exits these
modes.
l
Under frequency/duty cycle and capacitance measurement,
only autorange mode is available.
2. To exit the manual range mode, press and hold
RANGE
for
two seconds.
The Meter returns to the autorange mode and
is displayed.
is displayed.
13
Model UT60B/C/E: OPERATING MANUAL
