9) : Save/Down
In normal measurement mode, long press the button to save the current measured value, the icon
will blink if 199 groups of data storage have been fulfilled. Short press it to check the date and
time. In setting mode, short press the button to switch setting item or decrease setting value.
10) : Wavelength/confirm
In normal measurement mode, short press the button to switch laser wavelength, and long press it
to enter wavelength setting.
In date and time setting, short press this button to switch the digit position.
In setting mode, short press this button to confirm selection or enter the item.
8. OPERATION INSTRUCTION
1) Date and Time Setting
Short press to enter setting interface, switch to
S.dt
and short press to enter date and time
setting interface as figure below:
Short press and button to adjust setting value (long press to rapidly adjust). Short press to
move the cursor to the left, while short press to move the cursor to the right.
After the setting is done, short press button, the blinking of the icon means the date and time
setting is saved, then short press to exit.
2) Upper/lower Limit Threshold Setting
Short press to enter setting interface, select
S.dlt
and short press to enter lower limit threshold
setting interface as figure below:
In setting interface, select
S.ult
and short press to enter upper limit threshold setting interface as
figure below:
UT 385 User Manual
UT 385 User Manual
