31;
adjustable; long press “ME
18´
to enter function selection menu, and then
short press it to select SECREC interface, while the auto memory interval is
displayed on the main display; press “RA
1
GE/+” or “M
$;
MI
1
/-” key to adjust
the auto memory interval; press “ME
18´
key to enter
QH[
t function setting or
press “H
2
LD” to
H[L
t function setting. And luminometer will save the updated
settings.
Ɣ
Long press “REC/ERASE” to save data automatically, and “REC” sign
on secondary display
ÀDVKHV
, and the luminometer will save the
measured data according to the current auto saving interval setting; if the
storage space of luminometer is fully taken up, the system will
H[L
t auto
memory; and “FULL” sign will be displayed on LCD; press “REC/ERASE” key
to
H[L
t auto data memory function.
Ɣ
Manual data memory: in the normal measurement state, press “REC/ERASE”
once to save one measured data, and “REC” sign displayed on secondary
display
ÀDVKHV
once.
Ɣ
When 2044 pieces of data is fully recorded, “FULL” sign will be displayed on
LCD, and no data can be saved at this moment.
Ɣ
Under power-off state, press “REC/ERASE” and power on meanwhile, when
“CLR” sign is displayed on LCD, all saved data will be cleared.
3. View saved data:
Ɣ
Short press “ME
18´
to enter view recorded data function; if there is no
data record in the luminometer, “
ˉˉˉˉ
” sign will be displayed on both LCD
main display and secondary display, and the luminometer will return to normal
measurement state in about 0.5 seconds; If there a certain data records in
the luminometer, the total number of current data records will be displayed on
LCD secondary display, and the value of the last piece of data will be
displayed on the main display.
Ɣ
After entering option of view recorded data, press
³81
IT” to view the 1st
piece of recorded data; press “RA
1
GE/+” and “M
$;
MI
1
/-” keys to view data
records forward or backward;
HDFK2/'EXWWRQWRLQFUHPHQWE\
VHWVWKHPHWHUZLOOUHWXUQWRWKHILUVWUHFRUGZKHQWKHPD[LPXPQXPEHU
has been reached.
Ɣ
The luminometer can store up to 2044 records.
4. Restore to factory defaults:
Ɣ
Long press “ME
18´
key to enter function setting, and then short press this
key to select
'()"RSWLRQ
and “DEF
"´
sign displays on the LCD and
ÀDVKHV
, at this moment you can press “H
2
LD” to restore to factory defaults;
press “ME
18´
or “REC/ERASE”
WRH[LW
Ɣ
After restoring to factory defaults, the defaulting state of the system is: USB.0
(no USB transmission);
$32
1 (auto power off); 60s (auto record interval is
set up as 60s); clearing all data records.
5.USB data transmission function: (only for UT382, See Figure 4)
Ɣ
Long press “ME
18´
to enter USB
transmission setting, and “USB.0” or
“USB.1” will be displayed on LCD;
USB.0 means that data can’t be
transmitted; “USB.1” means that data
can be transmitted; press “RA
1
GE/+”
or “M
$;
MI
1
/-” key to switch between
“USB.0” and “USB.1”.
Ɣ
The meter is set to "USB.0" mode
automatically every time it is powered on.
Ɣ
The luminometer (UT382) communicates
with PC using USB wire and your PC must
have a USB port. See Figure 4 for the
connection diagram.
Ɣ
When connecting UT382 to the computer,
you cannot operate any functional buttons
during transmission.
Figure 4
6. Illuminance measurement
Ɣ
In process of measuring illuminance, the sensitive mirror must be
perpendicular to the measured illuminating source to ensure accuracy of
measured data..
Ɣ
If distance between measured illuminating source and illuminometer,
measuring position, angle or environment is different, then the measured
data will be different; because the intensity of light varies with change of
distance, position, angle and environment.
Ɣ
Make sure there is no scratch or dirt on sensitive mirror of luminometer, or
the measured data won’t be accurate.
Ɣ
When the illuminance
H[FHHGV
the measuring range of the luminometer, “
2
L”
sign will be displayed.
Ɣ
After completing measuring, cover the sensitive mirror with cap to avoid
scratch on sensitive mirror and keep it clean.
VI Spec
L¿
cations
1. General
VSHFL¿FD
tion
Ɣ
Low battery indication:
Ɣ
Type of sensor: digital visible light sensor
Ɣ
Sampling rate: 100 times/s
Ɣ
Power supply: one 1604A 6F22 9V battery
Ɣ
Battery life: 200 hours for typical battery (alkaline battery)
Ɣ
Dimensions:
PP[ PP[
26m
Ɣ
Weight: about 185g (including battery)
2. Environment limit
Ɣ
Indoor use
Ɣ
Safety standards: E
1
: 2006;
E
1
: 1998+A1+A2;
E
1
: 1998+A1+A2
Ɣ
Pollution degree 2
Ɣ2
perating temperature and humidity
:
ćć
(no more than 80%RH);
ćć
(no more than 75%RH);
ćć
(no more than 45%RH)
Ɣ
Storage temperature and humidity
ćć
(no more than 80%RH)
3. Electrical
VSHFL¿FD
tion
Ɣ
Accuracy tolerance: ± (a%rb digits), calibrate once each year
Ɣ
Environment temperature:
ćfć
Ɣ
Environment humidity
80% RH
Ɣ
Temperature coef
¿FLHQ
t: 0.1× (accuracy tolerance)/
ć
Illuminance measurement
Function Range Resolution
Accuracy Tolerance: ± ( a %rb digits)
Illuminance
measuring
(LU
;
)
Illuminance
measuring
(FC)
The accuracy tolerance of FC can
be
YHUL¿HG
by unit conversion:
FC=10.
OX[
, if accuracy tolerance
YHUL¿FD
tion is needed, it can be
achieved by unit conversion.
20Lu
[
200Lu
[
2000Lu
[
20000Lu
[
2FC
20FC
200FC
2000FC
0.01Lu
[
0.1Lu
[
1Lu
[
10Lu
[
0.001FC
0.01FC
0.1FC
1FC
± (3% + 20)
± (3% + 8)
± (3% + 8)
± (3% + 8)
VII Maintenance
Warning
During replacing battery or measuring, keep the sensitive mirror from scratch or
dirt to avoid damaging the mirror or
LQÀXHQFLQJ
the measuring precision; and do
not charge the replaced battery to avoid
H[SORVLRQ
and safety accident!
1. Battery installation and replacement
When “ ” is displayed on the luminometer, replace the battery immediately.
Replace the battery by following procedures:
Ɣ
Power off
Ɣ
Loosen the screw of battery cover and take it off.
Ɣ
Replace with a new 6LF22 9V 1604A battery, please use battery with the
same model, and do not use unauthorized battery.
Ɣ
Pay attention to the anode “+” and the cathode “-”. After completing
installation, install the cover and tighten the screw.
2. General maintenance
Ɣ
When the surface of luminometer is dirty, clean with wet cloth and neutral
detergent, grinding miller and solvent are forbidden.
Ɣ
When the luminometer is damaged and needs to be repaired, please send it
to the designated maintenance center of our company for repair by
professional service man, do not repair it without authorization.
Ɣ
Especially in the process of using, keep the sensitive mirror of luminometer
away from scratch or dirt to avoid damaging the mirror or
LQÀXHQFLQJ
the
measuring precision.
Ɣ
Remove the battery if it won’t be used for a long time.
Ɣ
Store the luminometer in a place free of moist, high temperature and strong
magnetic
¿HOG
.
S
SHFL¿FD
tions and other information shown on this instruction manual are subject
to change without notice
Ɣ
LCD: 3 1/2-bit display, 2000-count.
Ɣ2
ver range display: “
2
L”
