UNI-T UT322, Operating Manual

Page: 31 / 37

1. Press STORE to enter logging mode, the display shows DATA and blinks.
2. Press and hold down STORE 2 seconds, the display shows CLR.
3. Press ENTER to delete all the logged readings from memory. It is not possible
to delete the logged readings one by one.
The display then shows “----“
Communicating with a PC
You can transfer the contents of the thermometer’s memory to a PC using the
included Software.
Press SEND button and USB blinks on the display. It means the thermometer and
the PC are connected correct. Details refer to the Installation Guide file in the
Software.
Under the influence of radiated Radio-Frequency electromagnetic Field phenomenon,
the captioned model have a measurement error, it will be back to normal when the
interference is removed.
Model UT321/322/323/325: OPERATING MANUAL
31