4. Data Access and Exit
Press MENU to enter into data access status during measurement,
indicated by
RD
icon, then data lookup starts from
R
001
press
Up button to increment by 1, Down button to decrement by 10 and Left
to exit this status and return to measuring mode.
5. Data Delete
Press Right button when still under data access data to enter into data
delete option, then Left or Right button to move the cursor to select
YES
or
NO
, next MENU button for confirmation or exit, finally
returning to measuring mode.
18
19
V. Operating Instructions
Note:
Please carefully check if there are damaged parts or not before safe use.
Do not use the meter on dangerous sites.
Install the battery according to the manual.
Do not simultaneously press 2 buttons or more in case of invalid operation.
1. Power On/Off
Press ON to power on and LCD displays. Press OFF button to power off,
the meter will automatically power off 15 minutes later after power on.
2. Backlight Control
Press button after power on to control the backlight, which is suitable in
dark sites and at night.
3. Data Hold and Storage
Press HOLD button to maintain displayed data under measuring status,
indicated by
HD
icon, press again to cancel the operation. The meter
will automatically save and number current data while maintaining the data,
indicated by group serial number such as S
001. Max 500 sets of data is
available for the meter, displayed by
FULL
if the number is achieved.
