UNI-T
®
Uni-Trend Group Limited
Parameter testing: The current parameters are displayed
3.
Refresh waveform: single refresh; waveform time interval setup
4. Help:
Content;
About
Notes on front panel
Channel status:
Current status of the oscilloscope is displayed. When transmitting
data, this status bar displays the current status. When the oscilloscope’s status changes,
so will this status bar, but you cannot use this bar to control the current status of the
oscilloscope.
1.
CH1: Coupling method (DC, AC, GND); Bandwidth suppression (On Off); Filter
type (low-pass, high-pass, band-pass, band-stop); Digital filter (when the
indicator lights up the function is ON, when the indicator lights off the function
is OFF); Reverse (when the indicator lights up the function is ON, when the
indicator lights off the function is OFF); Probe (1X, 10X, 100X, 1000X).
2.
CH2: Coupling method (DC, AC, GND); Bandwidth suppression (On Off); Filter
type (low-pass, high-pass, band-pass, band-stop); Digital filter (when the
indicator lights up the function is ON, when the indicator lights off the function
is OFF); Reverse (when the indicator lights up the function is ON, when the
indicator lights off the function is OFF); Probe (1X, 10X, 100X, 1000X).
7
Uni-Trend Group Limited
. All right reserved 2007
___________________________________________________________________________________________
User Manual for UT2000_3000 Series Computer Testing & Control Software
