background image

4

3

1. Overview ---------------------------------------------------------- 4
2. Standard Accessories ------------------------------------------ 4
3. Safety Instruction ----------------------------------------------- 5
    3.1 Safety Certifications --------------------------------------- 5
    3.2 Safety Instruction -------------------------------------------5

 

4. Electric Symbols ------------------------------------------------- 7
5. Comprehensive Specification -------------------------------- 8
6. External Structure ----------------------------------------------- 9
7. LCD Display  ----------------------------------------------------- 10
8. Function Selection Knob and Buttons --------------------- 11
9. Measurement Operation Instruction ----------------------- 13
    9.1 AC Voltage Measurement  ------------------------------ 13
    9.2 DC Voltage Measurement  ------------------------------ 14
    9.3 Resistance and Circuit Continuity Measurement -- 15
    9.4 Diode Measurement -------------------------------------- 16
    9.5 Capacitance Measurement  ----------------------------  17
    9.6 AC/DC Current Measurement  ------------------------- 18
    9.7 Frequency and Duty Ratio Measurement 
         (Only UT17B PRO)------------------------------------------18
   9.8 Temperature Measurement (Only UT17B PRO)-----19
   9.9 Others ----------------------------------------------------------19

10. Specification -------------------------------------- 20
     10.1 DC Voltage Measurement --------------- 20
     10.2 AC Voltage Measurement ---------------  21
     10.3 Resistance Measurement --------------- 22
     10.4 Continuity Test And Diode 
             Measurement-------------------------------- 22
     10.5 Capacitance Measurement -------------- 23
     10.6 Frequency/Duty ratio Measurement  
             (Only UT17B PRO) ------------------------ 24
     10.7 Temperature  Measurement 
             (Only UT17B PRO) -----------------------  24
     10.8 DC Current Measurement --------------  25
     10.9 AC Current Measurement ---------------  26
11. Maintenance and Repair ----------------------- 27
     11.1 General Maintenance and Repair -----  27
     11.2 Batteries and Fuse Replacement ------ 27

Table of contents

1. Overview

UT15B PRO/UT17B PRO is highly reliable true RMS multimeter with auto backlight function. Equipped with its 

built-in VFC anti-interference start mode, it can filter the carrier frequency interference from sine wave, various 

distorted voltage signals, and stabilize the output voltage of measuring frequency converter. 

UT17B PRO is equipped with frequency and duty ratio mode in DC/AC function and temperature measurement 

function (resolution: 0.1°C). 

This product comes with CE, cETLus certification according to CATIII 1000V/CATIV600V safety level obtained. 

In addition, this series of products also give full function error detecting protection of up to 30kVA energy, to 

ensure safer operation. 

2. Standard Accessories

Open the package and check the below items, if any is missing or damaged, please contact your supplier 

immediately: 

     User manual -------------------------------------------------- 1 pc

     Test leads ------------------------------------------------------ 1 pair

     Point K-type (Ni-Cr ~ Ni-Si) thermocouple ------------ 1 pc

     Thermocouple Adapter ------------------------------------- 1 pc

 

 

     Battery ---------------------------------------------------------- 1 pair

UT15B PRO/UT17B PRO User Manual

UT15B PRO/UT17B PRO User Manual

Summary of Contents for UT15B PRO
















Reviews: