3
MANUAL - TRASH COMPACTORS - UTC920
Revised 2010-01
INTRODUCTION
Uni-ram holds many patents on designs used in its innovative products. Every machine is tested for com-
pliance with Quality Assurance standards. Follow the instructions on preparation, use and operation to
operate this machine safely and effectively. Ensure that this manual is readily available to the operator at
all times. If you have any questions about the operation of this machine, contact:
North America:
Uni-ram Technical Service
1-800-417- 9133
Other Continents:
Contact Your Supplier
CAUTIONS AND WARNINGS
• This is a very heavy piece of equipment and must be handled with care to avoid accident or injury. All
possible precautions must be exercised so that the unit does not fall, tip or adversely move to ensure
maximum safety during transportation, unpacking, installation, operation and service.
• Some items, such as pails, have a reinforced construction and cannot be fully crushed by the UTC920.
For maximum crushing power a supply pressure of 120 PSI is recommended.
• Do not use this equipment to compact any item that may explode when compacted or produce toxic
substances.
• Use the machine for its intended use only.
• Use the brake to lock the wheel of all four-swivel casters.
• Do not overload the machine. Exceeding the recommended compressed bale height may cause dam-
age to the cylinder.
• The Serial Number label is permanently fi xed to the back of this equipment. Vital information such as
Serial Number, Model Number, Electric Ratings, etc. are clearly marked on the label.
• Make sure that all markings and labels are not damaged or soiled and are clearly legible.
• Disconnect the air supply before performing any repairs or servicing the unit.
• Always keep the main control lever in “NEUTRAL” when either door is open.
MODEL
UTC920
POWER SOURCE
COMPRESSED AIR @ 120 PSI
ITEMS CRUSHED
PAPER, TRASH, CANS AND PAILS
TRASH COMPACTION
COMPARTMENT
4.75 ft
3
(0.13 m
3
)
COMPACTED TRASH BALE SIZE
40 TO 50 lb (18 TO 23 kg)
AIR CYLINDER
6.3” (160mm ) ID, DOUBLE ACTING, 16” (406mm) STROKE
MOBILITY
FOUR HEAVY DUTY SWIVEL CASTERS, TWO WITH BRAKES
COMPACTING FORCE
4,650 lb (2,100 kg) AT 150 PSI (10.4 kg/cm
2
CONTROL SYSTEM
CONTROL BOX, MANUAL CONTROL, DUAL 3-WAY VALVES
CONSTRUCTION
HEAVY GAGE STEEL, DURABLE POWDER PAINT
ASSEMBLY
FULLY ASSEMBLED, READY TO USE
SHIPPING DIMENSIONS (WDH)
32 X 28 X 58” (81 X 71 X 147 cm)
WEIGHT (LB / KG)
450 / 205
SPECIFICATIONS
