MANUAL - SPRAY GUN CLEANERS - UG5000 SERIES
Revision 2008-02
6
SOLVENT SELECTION
The adhesion quality of automotive paint has dramatically
improved in recent years. The choice of solvent is critical. Only
use good quality solvent that is formulated for your paint and
intended for use with automatic spray guns cleaners.
SOLVENT PAIL SETUP
The UG5000E has two tanks. The proccedure
described below applies to UG4000VM and UG3000DA tanks.
•
Open the door to the base cabinet
•
Move the Drain Valve handle to the "closed" (horizontal) position if it is not already there. See
picture.
•
Two 5-Gal (19 L) HDP round top closed pails of solvent are required for UG4000VM, one full
rinse pail and one containing 3 Gal. wash pail. Place the pails in front of the machine, full pail in
the middle position and the the other pail on the outside position.
•
One 5-Gal (19 L) HDP round top closed pail of solvent is required for UG3000DA. Place the pail
in front right of the machine(UG3000DA).
•
Inside the cabinet you will see two pipes strapped together, the Suction Pipe and the Rinse
Pump. Cut the strap holding them together. Do not cut the other straps holding the black and
blue tubes. The Suction Pipe is shown in the section, Replacement Parts.
•
Inside right the cabinet you will see the Suction Pipe disconnect it from valve by pushing the
gray button and bring the suction pipe out side of the cabinet. The Suction Pipe is shown in the
Replacement Parts section.(UG3000DA)
•
Disconnect the Suction Pipe from the Drain Valve by pushing the gray button and bring both the
suction pipe and the rinse pump outside of the cabinet.(UG4000DVM)
•
Insert the Rinse Pump into the full pail in the middle position and the Suction Pipe left into the
pail with 3 Gal on the outside.Suction pipe right into the full pail right side. The tube must be
inserted through the lid of the left (wash) pail. Models with a Manual Rinse feature have another
tube which needs to be inserted through the small hole of the middle (rinse) pail.
•
Move the wash pails into the cabinet and re-connect the Suction Pipes of the left and right pails
to the Drain Valves respectively.
•
Move the rinse pail into middle of the cabinet now.
Drain Valve
WASH PAIL
UG3000DA
780-8111P
RINSE PAIL
780-8120P
WASH PAIL
780-8110P
