10
MAINTENANCE
•
Always keep tools clean. Foreign material entering the tool mechanism may cause damage to the tool.
•
Do not use any aggressive cleaning agents and solvents for cleaning.
•
We recommend wiping plastic parts with a rag dipped in soapy water.
•
Wipe metal surfaces with a rag dipped in kerosene.
•
Store the unused equipment in a preserved state in a dry place where it will not corrode.
•
All maintenance work must be performed only when the power plug is disconnected from the mains
power supply.
•
Always follow the instructions provided in this user's manual.
•
Do not perform modi
fi
cations to this machine without contacting the vendor.
•
All maintenance works may only be performed by professional personnel.
•
Only use original spare parts for repairs.
Cleaning:
All polished parts of the machine are treated with an anti-corrosive agent. Do not use excessively aggres-
sive cleaning products, this will ensure that it is not removed. If this were to happen, the surface coating
could be damaged.
Brushes, drill bits are in terms of the legal warranty provided on goods considered
to be consumables in the sense of the law.
Lubrication
All high-speed shafts and cogged gears are seated in ball or cylindrical bearings, and thus the machine
requires only very limited lubrication.
DISPOSAL
It is necessary to dispose of the product at the end of its service life in accordance with the applicable
legislation. The product is made of metal and plastic parts that are recycled after separation.
1.
Disassemble all parts of the machine.
2.
Sort all parts according to the material (metals, rubber, plastics, etc.).
Hand over the sorted material for further use.
3.
Electrical and electronic waste (used electrical power tools, electrical motors, charging power sup-
plies, electronics, batteries, ...).
Dear customer, in terms of valid waste regulations, electrical and electronic waste is considered to consti-
tute hazardous waste the disposal of which is subject to special provisions.
It is forbidden to throw electrical and electronic waste into containers intended for the collection of com-
munal waste.
Likewise, it is possible to hand the machine over at electrical waste disposal points. Information on collec-
tion points is available at your local city o
ffi
ce or on the internet.
ATTENTION
In the event of a malfunction, send the equipment to the vendor's address so that the repair can be carried
out as soon as possible. A brief description of the fault will shorten troubleshooting and repair time. Include
the warranty card and proof of purchase with the equipment within the warranty period. We will repair your
equipment for a reasonable price after the warranty period expires.
To prevent damage to the equipment during transport, pack it securely and use the original packaging. We
are not liable for any damage during transit and any claims with the shipping service depends on the level
of packaging and protection against damage.
Note: The illustrations may di
ff
er from the product delivered and the extent and type of accessories sup-
plied can also vary. This is a result of development, and such di
ff
erences have no impact on the product's
correct functionality.
15
Third shaft
