6
Instructional diagrams
•
Switch position On
•
Switch position Off
•
Output = 5 V from the adapter connected to the
connector of the rear side of the laser head.
•
To connect the adapter to the electric power
use the adapter.
•
Rotating the radiated beam can only be done
once the head has been installed by releasing
the stopping screw - white arrow on the cover
of the head and by rotating the output grooved
cylinder - yellow arrow.
•
Once the beam direction has been setup,
secure the position by tightening the stopping
screw slightly.
7
•
Forms of use
•
Keep your device clean. Dirt from tools may enter the inner device mechanism and cause damages to the
device.
•
Do not use aggressive cleaning solution or paint thinners to clean your device.
•
Clean plastic parts with soft cloth dipped in soapy water.
•
If you are not using your device, lubricate it with suitable grease and store it in a dry place to prevent
corrosion.
Detailed description of the use of this device is not included in this manual, because the manufacturer /
distributor assumes that the user is experienced in similar type of work. Also according to the applicable
law, this device is considered as a commonly sold and used tool. If the user is unfamiliar with the use of
this device, we recommend finding out more information about using this device at the Department of
work safety.
MAINTENANCE