4
•
Never perform any maintenance during operation.
•
If you see any unusual sign or hear any strange sound, switch off the machine immediately.
•
Do not forget to remove all wrenches and screwdrivers from the machine after use.
•
Before use, make sure all screws are tightened securely.
•
Perform maintenance regularly. Before use make sure the machine is in good working conditions
and without any damage.
•
Use only original spare parts during repairs.
•
Using extension pieces or accessories not approved by the manufacturer may cause injuries to
the operating personnel.
•
Use suitable tool for particular type of work. Do not overload tools, accessories or the machine. For large
work volume use more powerful machine.
•
Do not overload your device. Measure the work load in such way, so it could be done with comfortable
speed. Damages due to machine overload are not covered by the warranty policy.
•
Do not expose to extremely high temperature or direct sunlight.
•
This machine is not designed for use in humid environments or under water.
•
If you are not using your machine, store it in a dry and safe place, out of reach of children.
•
Before use make sure that all safety elements work correctly and efficiently. Make sure all moving parts
are in good working conditions.
•
Before use make sure that no part is cracked or stuck, Make sure all parts are attached and assembled
as designed. Beware of all other conditions that may have a negative effect on the proper functioning of
your machine.
•
If not stated otherwise in this manual, all damaged parts and safety elements must be repaired or changed.
Fine mechanics
•
Never use a vise to hold you device.
•
Protect your machine from fall and impact.
Assembly
•
Do not use the machine unless completely assembled.
Electrical equipment
•
Observe all basic safety rules when using electrical equipment to prevent risk of fire, injuries by electrical
shock and other hazards. Before using this device, read this manual entirely and follow all safety instructions.
•
Make sure the power cable plug is plugged into the correct wall outlet. Voltage in the wall outlet must be
the same, as shown on the specification label of your machine.
•
When you finished your work, disconnect the power plug from the wall outlet and switch off the main switch.
•
Never carry electrical tools and appliances by their power cord. When disconnecting the plug from the
wall outlet, never pull the cable by its cord.
•
Protect the power cable from high temperatures, oils, paint thinners and make sure that the cable is not
hanging over sharp edges.
•
Inspect the power cable regularly. If damaged have it replaced by qualified technician. Inspect extension
cables regularly. If damaged, have it replaced.
•
If you need to use an extension cable, use cable with appropriate power rating. Use only completely unwound.
Inspect extension cables for damages regularly. Damaged cable must be repaired or changed immediately.
•
Before performing any maintenance, repair or adjustment, disconnect the power cable from the wall outlet.
•
Do not use in humid environments or if wet.
