UNI Geräte 10-EVSA, Operating And Maintenance Instructions Manual

Page: 6 / 25

Technical specifications
6 221.100.002-00 03/2021
www.uni-geraete.com
Flange connection acc. to DIN EN 1092-2 / ANSI
DN flanges Dimen-
sion
15 20 25 32 40 50
Overall length A 130 150 160 180 200 230
ANSI flanges Dimen-
sion
1/2” 3/4” 1” 11/4” 11/2” 2”
4-EVSA B 240 240 290 320 370 375
B` 320 320 385 425 500 520
ØC 106 106 127 127 153 153
D 50 50 55 68 68 75
10-EVSA B 290 290 290 320 370 375
B` 385 385 385 425 500 520
ØC 127 127 127 127 153 153
D 50 50 55 68 68 75
16-EVSA B - - 460 - 480 -
B` - - 620 - 640 -
ØC - - 194 - 194 -
D - - 55 - 68 -
25-EVSA B - - - - - 450
B` - - - - - 610
ØC - - - - - 194
D - - - - - 75
40-EVSA B 460 - 469 - - -
B` 620 - 620 - - -
ØC 194 - 194 - - -
D 50 - - - - -
A = overall length acc. to DIN (e.g. ANSI flanges and DIN overall length or DIN flanges and overall length)
Overall length according to ANSI (see data sheet for overall fitting lengths DIN / ANSI 225.100.026 on our
homepage)
B` = dimension for removal of the solenoid drive
For solenoid drives for Ex-protection zone 1, the dimensions B and ØC change.
Observe dimensions for actuators with attached control system. (see operating instructions for solenoid
drive)