Safety & Warnings
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
Operation
After connect well with DMX decoders, please set the DMX decoders
address as below:
DMX decoder’s address 001 is controlled by Zone 1
DMX decoder’s address 005 is controlled by Zone 2
DMX decoder’s address 009 is controlled by Zone 3
DMX decoder’s address 013 is controlled by Zone 4
Short press zone number is to choose a zone, long press zone
number
is turn on/off that zone individually
To synchronize several zones, short press 2 or more buttons one after
another, then touch the color wheel
a.how to operate zone button
b.how to save color or mode
Choose a zone(for example zone1) to do the control, if you like a color or playing mode, long press S button,
until the indicator turns pink color , then touch any one of the number 1~4(for example 2), the led will flash
means saved. by this way each zone can save 4 colors or modes.,
How to get that saved color or mode :short press zone number---->short press S, then short press the number
you saved (for example 2 )
Zone number
indicator
UNI-BRIGHT bvba – Belcrownlaan 13Q, 2100 Antwerpen, Belgium
Tel : +323 641 61 40 Fax: +323 645 18 31 email: [email protected]
www.unibright.be
VERSION 1 - 02/24
