Last Updated: 09/02/2022
[ WARNING!! ]
Installer must ensure that the Ground (black wire) be connected
first
before
connecting Power (red wire) or any other wires. Additionally, all wires
MUST
only connect to Ground other than the Power (red wire) - refer to the Wiring
Information below.
Failure to follow instructions
can short-circuit lamp.
Lamp should be fused with a 10 Amp Fuse (
ATM10 sold separately
)
Wire Colour
Function
Connect To
Black
Red
Brown
Orange
Green
Blue
Yellow
Ground
Power
Left Warning Signal
Right Warning Signal
Take-Down Light
Alley Light
Flash Pattern Selection
- Ground
+12/24 V DC
- Ground
- Ground
- Ground
- Ground
- Ground
- Once to the next pattern
- Hold 3 seconds for flash pattern #29
Briefly Connect Flash Pattern Selection wire
(Yellow wire) to Ground:
INST
ALLA
TION MANU
AL
E-2477AC
Wiring Information
Pattern Selection
NO.
Flash Patterns
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Random Patterns
Rotating Flash
Alternating Single Flash
Alternating Double Flash
Alternating Quad Flash
Alternating Quint Flash
Alternating Mega Flash
Alternating Ultra Flash
Alternating Single Flash / Alternating Quad Flash
Alternating Single Flash / Alternating High Intensity Single Flash
Alternating Double-Quad Flash
Alternating Single-Quad Flash
Simultaneous Single Flash
Simultaneous Double Flash [
SAE Class 1
]
Simultaneous Quad Flash
NO.
Flash Patterns
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Simultaneous Quint Flash
Simultaneous Mega Flash
Simultaneous Ultra Flash
Simultaneous 8 Single Flashes / 4 Quad Flashes
Simultaneous 8 Single Flashes / 6 Fast Single Flashes
Simultaneous Double Flash / Simultaneous Quad Flash
Simultaneous Single Flash / Simultaneous Quad Flash
Left Side Steady & Right Side Double Flash
Simultaneous Single Flash (2Hz)
Simultaneous Double Flash (2Hz) [
SAE Class 1
]
Simultaneous Triple Flash (2Hz)
Simultaneous Quad Flash (2Hz)
Simultaneous Quad Flash (Split)
Steady Corner Light
Hardware List - Surface Mount - Bag #1
Flash Patterns
NOTE: Please ensure that all contents listed on the Hardware List above are present & correct before proceeding to Mounting Installation
Hardware List - Strap/Gutter Mount - Bag #2
ABS Support
Bracket
Steel Holding Plate
M8 - 30mm
Hex Bolt
x2
M8 - Form A
Flat Washers
M8 - Form A
Spring Washers
M8 - Form A
Hex Nut
Tightening
Hook
Lock Bracket
Mounting Pads
M8 - 45mm
Hex Bolt
M6 - 15mm
Hex Bolt
M8 - Form A
Flat Washers
x2
x8
x8
x8
x8
x2
x2
x1
x2
x2
x2
M8 - Form A
Spring Washers
M8 - Form A
Hex Nut
M6 - Form A
Spring Washers
M6 - Form A
Hex Nut
x2
x2
x2
x2
M6 - Form A
Flat Washers
x2
