NOTE :
a). Keep a distance of the speaker up to 7 meters apart from the transmitter,
and then press “AUTO SCAN” button for the best reception.
b) Whenever you find frequency jam, move your channel switch from one
channel to the other channel (there are two channels for selection) on the
transmitter, and then press the “AUTO SCAN” button again.
6.
You should now be able to place the speakers freely from room to room
without disruption. Should there is any disruption (signal cuts off or carries
distortion), press the speaker’s “AUTO SCAN” button to maximize the best
reception.
If you hear interference from other components, switch on the channel control
of transmitter, and then move the speakers to other free location. You can
re-adjust the tuning control by moving it either channel 1 or 2 of the transmitter,
then pressing “AUTO SCAN” button for best reception.
When transmitting / receiving over long distances, the signal from the system
will become weaker.
7.
Switching Off
a) For protection of the transmitter and power saving, the transmitter will cut
off automatically if there is no/weak operation input signal from audio
source for 4 minutes.
In other words, if the signal comes back, the transmitter will work again
automatically.
b) Press the “POWER” button to turn off the speaker and the LED light goes
off.
