P.4
2. Press POWER button and turn the speakers ON. The POWER LED will light
up in blue. Switch off the speakers by pressing the POWER button on the
speaker, and the LED will be off.
OPERATION
1. Turn on the audio source (TV or audio component) to which the transmitter is
connected with. The green LED on the transmitter will light up.
2. Select the channel (1/2/3) of the transmitter for best performance in your
location.
3. Press the “POWER” button on the speaker to turn on the speaker. Press the
“AUTO TUNE” button to get the best tuning reception in the speakers. When
the button is pressed, frequency tuning starts automatically and it stops when a
signal is detected.
4. Volume can be adjusted up
by pressing “+” button or
down by pressing the button
“-“ to the desired listening
level.
5.
Press the “LIGHT” button to
turn ON of OFF the blue LED
lighting.
NOTE :
a). Keep a distance of the speaker up to 7 meters apart from the transmitter,
and then press “AUTO TUNE” button for the best reception.
b) Whenever you find frequency jam, move your channel switch from one
channel to the other channel (there are two channels for selection) on the
transmitter, and then press the “AUTO TUNE” button again.
6.
You should now be able to place the speakers freely from room to room
without disruption. Should there is any disruption (signal cuts off or carries
distortion), press the speaker’s “AUTO TUNE” button to maximize the best
