Unfinished Furniture of Wilmington TV-49 Quick Start Manual Download Page 2

ITEM NO.: TV-49
REVISED JAN 13, 2016

Printed in Vietnam

- 2 -

Thank  you  for  purchasing  this  quality  product.  This  product  has  been  designed  for  easy  assembly
and constructed for durability. All parts were checked prior to packaging to insure quality. Prior to
beginning assembly, however, make sure all parts and hardware are included and free of obvious
defect. If a part  is missing or defective, please contact the store where purchased. If hardware is
missing, or you need help with assembly, please call toll free 888-944-8396.

IMPORTANT NOTE:

-

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the
parts from being scratched.

-

Remove  all  wrapping  material,  including  staples  &  packing  straps  before  you  start  to
assemble.

-

DO NOT tighten all screws and bolts until completely assembled.

-

Keep all hardware parts out of reach of children.

WARNING:

Long  exposure  to  rubber  or  soft  plastic  may  cause  a  chemical  reaction  and  damage  the

finish of your table. Protect the surface of the table with cloth if you are using any product
with rubber feet or base.
.

BEFORE ASSEMBLY

ASSEMBLY TOOLS REQUIRED

NOT INCLUDED

Summary of Contents for TV-49









Reviews: