ITEM NO.: T-4818XBT AND T-4818XP
ISSUED AUG 08, 2015
Printed in Vietnam
THIS ITEM IS PACKED IN TWO CARTONS
- 5 -
STEP 3
Attach the leg (D) to the pedestals (C) with long bolts (1) and washers (2) and (3) as shown below.
Tighten with the Allen key (5). Then attach legs (D) with screws (6) as shown below. Tighten with the
screwdriver.
STEP 4
Carefully put the pedestal block on the bottom side of the table top (A), attach the top to plate with
short bolts (4) and washers (2) and (3) as shown below .Tighten with the Allen key (5).
