Doc. No: Unex-QSG-21-003
12/30
A printed version of this document is an uncontrolled copy
© 2023 Unex Technology Corporation – Company Confidential
•
one GNSS antenna
Receptacle connectors are
I-PEX MHF I 20279-001E-03
. For more information about
mating plug connectors, visit the website
https://www.i-pex.com/product/mhf-I
detail.
Figure 3: Antenna connectors
The antenna connection is one of the most important aspects in the full product design
as it strongly affects the RF performance. Connecting cables between the module and the
antenna must have 50 Ω impedance. If the impedance of the module is mismatched, RF
performance will be reduced significantly.
Please be careful when extracting the antenna cables from a SOM-352 module.
Extracting the connector by pulling the cable may cause damage on the antenna plug
assembly. It is recommended to extract the cable using a proper extraction tool suggested
by the cable plug manufacturer. For I-PEX plugs please use
I-PEX 90192-001 or 90224-
001
.
V2X1 ANT
V2X0 ANT
GNSS ANT
