Unex CM10-HI, Manual

Page: 4 / 10

[Unex] - Ver. 1.9 20100907 P. 4
Pin Assignment:
55 GROUND Ground Digital ground
56 PAR BiDir, Weak pull up PCI bus parity
57 AD[17] BiDir,, Weak pull down PCI address/data bus bit 17
58 AD[18] BiDir,, Weak pull down PCI address/data bus bit 18
59 C/BE[2]# BiDir, Weak pull up PCI bus commands and byte 2 enables
60 AD[16] BiDir,, Weak pull down PCI address/data bus bit 16
61 IRDY# BiDir,, Weak pull up PCI initiator ready
62 GROUND Ground Digital ground
63 3.3V Power 3.3V±10%
64 FRAME# BiDir,, Weak pull down PCI frame.
65 CLKRUN# Input, Weak pull up Control signal for PCI clock
66 TRDY# BiDir,, Weak pull up PCI target ready
67 SERR# BiDir,, Weak pull up PCI system error
68 STOP# BiDir,, Weak pull up PCI cycle stop signal
69 GROUND Ground Digital ground
70 3.3V Power 3.3V±10%
71 PERR# BiDir, Weak pull up PCI bus parity
72 DEVSEL# BiDir, Weak pull up PCI device select
73 C/BE[1]# BiDir, Weak pull down PCI bus commands and byte 1 enables
74 GROUND Ground Digital ground
75 AD[14] BiDir, Weak pull down PCI address/data bus bit 14
76 AD[15] BiDir, Weak pull down PCI address/data bus bit 15
77 GROUND Ground Digital ground
78 AD[13] BiDir, Weak pull down PCI address/data bus bit 13
79 AD[12] BiDir, Weak pull down PCI address/data bus bit 12
80 AD[11] BiDir, Weak pull down PCI address/data bus bit 11
81 AD[10] BiDir, Weak pull down PCI address/data bus bit 10
82 GROUND Ground Digital ground
83 GROUND Ground Digital ground
84 AD[09] BiDir, Weak pull down PCI address/data bus bit 9
85 AD[08] BiDir, Weak pull down PCI address/data bus bit 8
86 C/BE[0]# BiDir, Weak pull up PCI bus commands and byte 0 enables
87 AD[07] BiDir, Weak pull down PCI address/data bus bit 7
88 3.3V Power 3.3V±10%
89 3.3V Power 3.3V±10%
90 AD[06] BiDir, Weak pull down PCI address/data bus bit 6
91 AD[05] BiDir, Weak pull down PCI address/data bus bit 5
92 AD[04] BiDir, Weak pull down PCI address/data bus bit 4
93 RESERVED NC Reserved
94 AD[02] BiDir, Weak pull down PCI address/data bus bit 2
95 AD[03] BiDir, Weak pull down PCI address/data bus bit 3
96 AD[00] BiDir, Weak pull down PCI address/data bus bit 0
97 5V 5V Optional 5V for 5Ghz and 2.4Ghz PA
98 RESERVED_WIP4 NC Reserved
99 AD[01] BiDir, Weak pull down PCI address/data bus bit
100 RESERVED_WIP4 NC Reserved
101 GROUND Ground Digital ground
102 GROUND Ground Digital ground
103 AC_SYNC NC No use
104 M66EN NC PCI 66MHz Enable, no use
105 AC_SDATA_IN NC No use
106 AC_SDATA_OUT NC No use
107 AC_BIT_CLK NC No use
108 AC_CODEC_ID0# NC No use
109 AC_CODEC_ID1# NC No use
110 AC_RESET# NC No use