User Manual of Network Camera
17
17
Chapter 3 Parameter Configuration
There are several network parameters of the camera which need to be set after the hardware
installation. Those parameters including IP address, subnet mask and port number, etc. can be set
through various kinds of methods, 2 of which are introduced as below.
1.
Set the camera parameters via IE.
2.
Set the camera parameters through the client software.
Please make sure that the PC and network camera are connected and can ping successfully before
the parameter setting.
3.1 Network Camera access model overview
3.1.1 Wireless Network (Only “-w” series support)
Type 1: Point to Point Cennect Model
In this model, the camera is connected to the PC on wireless network directly.
Fig 3.1.1 Point to Point connection
Type 2: Integrated connection
In this model, the camera is connected to the wireless access point.
Summary of Contents for DS-2CD702NF-E Series
