Introduction:
Congratulations on the purchase of your new thru-hull LED underwater light. Underwater Lights
®
USA, LLC takes pride in providing
well designed, high quality and thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be
installed on your vessel for aesthetics, to attract fish and/or for security and safety.
General Operating Information:
The latest commercial grade “COB” High-Density Light Emitting Diode (LED) technology used in this light will provide robust and
reliable operation under normal operating conditions when used with the matching Underwater Lights
®
USA, LLC driver.
The
SV20
LED
is
intended
for
use
on
fiberglass
and
wood
hulled
vessels.
Depending
upon
water
clarity
conditions,
the
light
beam
can
reach
up
to
18
meters
(60
feet).
General
Safety
Information:
Never
try
to
install
or
remove
this
light
while
the
vessel
is
in
the
water.
Electrical
wiring
harness
components
should
be
kept
out
of
potentially
explosive
gas
environments.
The
body
of
the
light
must
be
electrically
joined
to
the
vessels
grounding
and
cathodic
protection
system.
Failure
to
do
so
may
cause
galvanic
corrosion.
Always
disconnect
and
lock-out
power
before
working
on
light.
The
light
should
be
visually
inspected
every
six
months.
The
light,
electrical
components
and
electrical
cabling
should
be
visually
inspected
for
proper
operating
condition
every
six
months.
Marine
growth
should
be
removed
from
the
glass
using
a
soft
brush
to
allow
both
heat
and
illumination
to
exit
the
light.
Technical
Specifications:
Light
source
=
Instant-on
high
flux,
high
density
LED
array
-
3,040
Lumens
(Peak
Axial
Candela
1405)
and
5,000
Kelvin
color
temperature
in
White
or
optional
Blue
LED
array
-
40,000+
hours
life
-
Thermal
limit
switch
and
short
circuit
protection
included
Glass = Borosilicate glass - 9.5mm (0.38”) thick - 41mm (1.61”) diameter net aperture
Construction = Marine bronze - Black anodized marine aluminum alloy - Black delrin
Light dimensions = 80mm (3.15”) diameter x 159mm (6.26”) long - 1,999 grams (4.4 pounds)
LED driver dimensions = 122mm (4.8”) long x 60mm (2.36”) wide x 29mm (1.14”) tall - 112 grams (0.25 pounds)
Power supply = 12 VDC nominal (18 VDC max) - 4.2 Amps continuous - Operating temperature from -30°C (-22°F) to 50°C (122°F)
OR
Power supply = 24 VDC nominal (32 VDC max) - 2.0 Amps continuous - Operating temperature from -30°C (-22°F) to 50°C (122°F)
Troubleshooting:
Please contact our technical support staff in Florida at 1-954-760-4447, Monday to Friday from 8:00 am to 5:00 pm EST.
Warranty:
Underwater Lights
®
USA, LLC warrants this light to be free from defects in workmanship and materials for a period of two years
from the date of original purchase. Further, misuse, abuse, improper installation, neglect, improper shipping, damage caused by
disasters such as fire, flood and lightning, unauthorized repair or modifications will void said warranty. Should your light prove
defective during the warranty period, promptly contact Underwater Lights
®
USA, LLC for an RMA number and then return the light
freight prepaid with the RMA number clearly marked on the outside of the shipping container.
Thru-Hull Mount, LED Array
Underwater Lights Europe Sarl
16, rue Rouaze
06400 Cannes, France
Phone: 33-(0)-4-97-21-02-96
Fax: 33-(0)-4-97-21-10-96
Internet: www.seavision.com
Underwater Lights USA, LLC
3406 SW 26th Terrace, C-6/7
Fort Lauderdale, FL 3331
2
USA
Phone: 1-954-760-4447
Fax: 1-954-525-3261
Internet: www.seavision.com
Email: [email protected]
DOC:013015-4
Email: [email protected]
SV20 LED
Underwater Light
