Underhill Tracker Assembly and Operation Instructions
6
Assembly Instructions
The sequence of installing the Tracker is listed below;
•
Assemble and install the wheels
•
Assemble and install the water supply fittings
•
Install the impact sprinkler
•
Locate and understand pull-rope release mechanism
•
Locate and understand how the auto-shut-off function operates.
Assemble and Install the Wheels
Place the Tracker on its side. Insert the one of the hollow aluminum axles into the one of
the wheels with the ribs of the wheel facing outward as shown in Figure 6-1.
Inserting Axle into Wheel
Figure 6-1
Slide the wheel and axle assembly into the axle support and clip into place with the
black axle retainer clip so the smooth side of the wheel faces inward. See Figure 6-2.
Snap Retainer Clip onto Axle
Figure 6-2
Repeat this process for the remaining 3 wheels