19
*
7.4:
Calibration
7.4.1:
Depth Calibration
Even if the transmitters roll, pitch, battery status and temperature are
displayed correctly, calibration may not be reliable due to a
distorted magnetic field
Make sure pitch is 0% during calibration. If pitch is not 0%, displayed
depth will not match calibration distance until pitch is changed to 0%.
Calibration complete.
Tap to enter Calibration and
Depth Forecast Page.
Always do
10ft calibration first.
Tap to once to enter
Calibration Page, and twice more to
begin calibration.
Tap to return to Main Page.
1.
Make sure that the transmitter is working properly and
place it in the housing.
2.
Place housing containing the transmitter in a location
away from interference.
3.
Set transmitter and receiver 10ft apart from center of
transmitter to the inside edge of receiver
’
s base, as shown.
(33 or 66ft should only
be used when drilling at extreme depths)
Summary of Contents for Mag System
