Warning:
Even if the transmitter’s roll, pitch, battery status and
temperature are displayed correctly, calibration may
not be reliable due to a distorted magnetic field.
1. Make sure that the transmitter
is working properly. Place it in
the housing.
2. Place housing containing the
transmitter in a location away
from interference.
3. Set transmitter 10 feet apart from center of housing
to center of receiver as shown.
4. Tap to enter
calibration page.
5. Tap three times to
start 10ft calibration and
wait for calibration to
complete.
7. Calibration complete.
8. Tap to return to main
page.
Page 8
