UnderCover 2110, Installation Manual

Page: 14 / 16

Release strut off of ball stud
Picture B . Holding tonneau up with
one hand, place loose end of strut
on storage clip
Picture C . Repeat for
the other side.
Turn twist knobs until they
release Picture A.
Go to the rear of the truck
and pull Tonneau cover back,
releasing the post from the hinge
slot,
Picture D . You are now ready
to lift the cover off.
STEP 1
STEP 2
STEP 3
Place tonneau on the truck
and follow instructions on Page 7 .
Be sure that the front flap
seal is hanging over the bulkhead
and not rolled under, see
Picture E
on this page.
Reinstall struts as seen in
pictures Pictures F and G on this
page.
STEP 1
STEP 2
STEP 3
Congratulations! Your 30-minute installation job is now complete. Now, in less than one
minute, you will be able to put on and take off your tonneau cover.
FORM # IG2110HH
Modified Mar 2009
Page 13
Model 2110 Ford Explorer Sport Trac 2007-Current