CLASSFICATION
.
Installation Manual
MODEL
.
ENB-X1
DOCUMENT NO
.
BU No. 10
Hyundai Accent In-Dash Navigation DIY Installation Guide
VERSION
1.2
PAGE
16
Information & Manual
Copyright © 2012 UNAVI USA, Inc. All rights reserved.
Date: 4/18/2012
*Please check after installation when the radio unit is powered on*
Red LED lights on the circuit board will flash intermittently indicating data communication.
Please proceed with CAUTION when
inserting the ribbon cable into the Trip
Interface Board.
DO NOT twist the cable as this may result
in a damaged board and/or the audio unit!
The Trip Interface Board is designed to
communicate with either side of the pins.
Connecting the ribbon connector between the
trip interface board and the audio head unit:
- Lift up the lock on the Trip Interface Board
- Gently slide in the ribbon able (typically blue
end facing up) until it can’t slide in any
further
- Push the lock down to secure the cable
