DG-OHM
UNAOHM Srl Rev. 4.0
17
9.3 CLEAR NIT AND TV PICTURES VIEWING (phase 3
button)
Once phase 2 has been completed and, therefore, the best quality and quantity signal has
been obtained, simply press the
button to activate the MPEG4 board, which will
communicate the N.I.T. network information table (list of channels contained in the MUX) and
will allow for selection of a television broadcaster to display clear pictures.
In NIT mode, press the
button (single click), select TRASPARENT mode to have the
words superimposed on the pictures, or select BLACK to have the black background with no
images behind.
To select the viewing of a television broadcaster, from the NIT screen, simply use the
button to move and then single press the
button to see the clear digital pictures.
Clear digital terrestrial TV mode picture
From the digital TV screen, press the
button to recall the side menus which will allow:
STATUS B.
Status bar management: Activates/deactivates (full screen viewing)
CHANNEL INFO
Select the broadcaster and relative information: channel name, video
PID, audio PID
AUDIO
To select audio for that channel
DIGITAL MEASUREMENTS
View the main digital measurements together with pictures
Management of adjustments such as brightness, contrast, volume by pressing and holding
the
button which will activate the control bars.
Use the
keys to select the various settings:
VOLUME (only in TV mode)
CONTRAST
BRIGHTNESS
Use the
keys to increase or decrease relative contents.
