AP01-HD_rev.09_UK
29
Turn the
SHAFT ENCODER
to highlight the desired plan and press
ENTER
.
For each plan
the screen displays the following menu:
•
START LOGGER: to start measure acquisition according to present plan settings;
•
DISPLAY DATA: to display outcomes of acquisitions;
•
DELETE DATA: to delete stored data of the plan;
•
DISPLAY PLAN: to display settings of the selected plan.
After selecting this function, pressing the
MENU
key the following function boxes are
shown on the right side of the screen:
EDIT: it enables to edit the items of the selected plan. Turning the
SHAFT
ENCODER
you can move the cursor to the plan position to be edited or filled in, if
empty. Press the
MENU
key to change the selected value turning the
SHAFT
ENCODER
.
DELETE: pressing the
ENTER
key when this box is set, you can delete the content of
the selected item.
STATUS: pressing the
ENTER
key
when this box is set, you can select the status
on
or
off
of plan positions as follows:
ALL: to set
on
for all positions;
NONE: to set
off
for all positions;
ONE BY ONE: to set the status of each position.
START LOGGER: pressing the
ENTER
key
when this box is set, you can start the
acquisition session.
•
EDIT PLAN NAME: to edit the plan name.
•
DELETE PLAN: pressing the
ENTER
key
when this box is set, all positions of the
selected plan are deleted.
•
RS232 PRMT
: selecting this item you can display the window which enables to see
and set parameters of the serial port:
•
BAUD RATE: it indicates the communication speed
•
BIT FORMAT: it indicates the communication format
•
PARITY: it indicates the parity-control setting
•
HANDSHAKE: this control may be
ON
or
OFF
To modify setting, select the desired item turning the
SHAFT ENCODER
; press
ENTER
to
confirm.
Turn the
SHAFT ENCODER
again
to change the set value, then press
ENTER
to confirm
the new selection.
