Umuzi Cleaning UZ-CL-STIS01, User Manual

Page: 8 / 42

EN-6
Temperature dial
Turn the temperature dial (D) to the set ironing temperature, corresponding with the garment to be ironed.
TEMPERATURE DIAL
I Nylon-silk 70° C < 120° C
II Wool 100° C < 160° C
III Cotton 140° C < 210° C
IV Linen 170° C <225° C
Temperature indicator
When the device is heating up, the temperature indicator
(B) lights up.
Once the device has reached the temperature set by the
temperature dial (D),
the indicator will no longer light up.
During use, the temperature indicator (B) will light up again, indicating it is heating in order to maintain
the set desired temperature.
• The device heats up quicker than it cools down. Therefore, start with ironing articles that require a lower
temperature.
• If the article consists of various fabrics, you must always select the lowest required ironing temperature.
• Synthetic fibers and silk fabrics should be ironed on the inside to prevent them from getting a sheen.
• Velvet and other textures that rapidly become shiny should be ironed in one direction while applying
light pressure. Keep the iron moving at all times.
• Pure wool fabrics (100% wool) may be ironed with the steam iron. Use a dry cloth as a mat and then
select the corresponding fabric setting for ironing.
• Never iron over zippers or rivets in the cloth. This will damage the soleplate. Iron around any such object.
• When ironing woolen fabrics, the fabric could get a sheen. We suggest turning the article inside out and
ironing the reverse side.
Steam trigger
When the device is heated to the set temperature and the temperature indicator (B) no longer lights up,
hold the steam trigger (C) to emit steam from the soleplate (A) while ironing.
When the steam trigger (C) is released, the device can be used for (dry) ironing without steam.
During use, the temperature indicator (B) will light up again, indicating it is heating in order to maintain
the set desired temperature.
Cord clip
When the device is not in use, the power cord and steam supply hose can be stored in the cord clips (4)
Correct placement of the iron on the thermal isolation stand
When the device is placed on the thermal isolation (5), it must be placed correctly to prevent it from
falling from the base.
I
II
III
IV