-2-
RECEIVER PARTS DESCRIPTION
1
2
3
4
5 6 7
8
8
9
10
11
12
Front
Rear
SQUELCH
1.
2. Infrared (IR) port: Broadcasts IR signal to transmitter to synchronize
frequencies.
3. LCD display: display group, channel no, RF and AF level.
4. Select switch: Press to select the currently displayed menu option.
5. Menu switch: Press to scroll through menu options.
6. Sync Button: Press to initiate IR connection between receiver and
transmitter.
7. Volume control: Turn to adjust volume.
8. Antenna connector: To install supplied antenna here.
9. Squelch adjust
10. Individual Balanced XLR output
11. Mixed 1 / 4 " output jack
12. MIC/LINE switch
13. DC input jack
On/Off switch: Turn on/off the receiver.
13
-5-
Any option displayed on screen will generally "time out" after five seconds.
Group Selection
Channel Selection
2x
3x
1. Press
MENU
twice. LCD screen will display
Group Select
.
2. Then press
SELECT
repeatedly to increase the group number.
3. When the correct group is displayed, either wait five seconds for
the screen to time out, or press
SYNC
button to escape.
1. Press
MENU
three times. LCD screen will display
Channel Select
.
2. Then press
SELECT
repeatedly to increase the channel number.
3. When the correct channel is displayed, either wait five seconds for
the screen to time out, or press
SYNC
button to escape.
MANUAL SELECTION OF GROUP/CHANNEL
We suggest to use Auto Channel Select to select the best channels.
1. Press and hold the
SELECT
button until the GROUP and CHANNEL
displays begin to alternate.
2. To change the group setting, release the
SELECT
button while
GROUP is displayed. While GROUP is flashing, pressing
SELECT
button repeatedly to increase the group setting.
3. To change the channel setting, release the
SELECT
button while
CHANNEL is displayed. While CHANNEL is flashing, pressing
SELECT
button to increase the channel setting.
MANUAL SELECTION OF RECEIVER GROUP/CHANNEL
MANUAL SELECTION OF TRANSMITTER GROUP/CHANNEL
