In The Box
Assembly Instruction
Align fan blade hole to the motor and mount
using the M6 screws. Repeat for other fan
blades.
*Use PH2 stubby phillips screwdriver and 10mm
spanner.
Ensure that the safety rope passes
through the fan hook and then securely
fastened using the screw provided.
Safety
Rope
Ceiling
Hook
Fan Motor x 1
Fan Regulator x 1
Fan Blade x 3
Bottom Cover x 1
Middle Cover x 2
Wiring Diagram
L
N
E
Incoming
240V~
Earth
Rotate bottom canopy till
wires slotted in correctly with
minimal gap clearance as
shown.
Screw
NOTE!
The Wires are coloured with
the following code:
(Brown - Live; Blue - Neutral;
Green/Yellow - Earth)
Slide top canopy to the ceiling
and tighten using the screw hole
provided before assembling and
tightening the middle cover.
Remove plastic sleeve from the
thread before tightening the
bottom cover.
*Clockwise direction to fasten
M6 Screw
Double Pole
Switch
*Switch shown not included
Loosen the screw and lower top canopy
to the middle cover and tighten.
Screw Hole
Check gap clearance before tightening
bottom canopy using the bottom screw
holes provided.
Plastic Sleeve
ü
û
Fan Regulator
