Step2 Display bracket Installation
1
To ensure optimal installation,this kit includes various screws of differe diameters and lengths.
2
Place your TV screen down on a soft,flat surface,and locate the threaded mounting points that are
located on
the back of the display.
3
Determine which screw (A/B/C/D/E/F)is of the correct length by carefully
inserting a straw, or
toothpick,and mark how deep the mounting point is.
4
If your display has a curved back or a recessed thread mounting point, a spacer(N) must be used.
5
Place the spacer(N) between the mounting bracket and display.
6
According to the size of display's hole,choose the corresponding screw and hole on the rectangle
washer,then thread them in line
.
Step3 Final Installation & adjustment
1
Hook the TV Rails over the top of the wall plate. The TV Rail could be tilted from -5 to 15 degree.
Tighten the middle screw on TV rails by wrench to adjust the tilting hardness.
Also you could swivel it to left&right.
2 It can be balance adjust by loose and tighten the four behind M8 Nuts with 3 degrees.
3
lock it to avoid the theft through rotating the key until the hook touch the bottom bar of the wall plate.
N
K
D,E,F
A,B,C,
D,E,F
K
3
-
a
add plastic cover
STOP
CAUTION:
Do not over-tighten bolts-doing so many cause unnecessary damage to the wall.
Avoid excessive torque.
Do not release the wall plate until it is properly mounted and secured to the wall.
CAUTION:
M8
Nut
+
-
3
O
umount
,
Unit 2 Lon Parcwr Business Park,Ruthin,
Denbighshire,LL151NJ-www.umount.tv
M8 SCREWS
M8 WASHER
M8 NUT
ADD THE HEAD
