1. Inserting the FC grommets
a. Get some floss to use as a tool and insert a loop through the FC hole.
b. Hook the floss around the lip of the grommet.
c. Pinch the end and insert as much as you can with your fingers through the hole.
d. Pull on the floss to get the grommet out of the other side. Be careful as the grommets can tear.
e. Using a small (not sharp) tool to push the grommet through works as well.
f. Repeat for the rest of the grommets.
2. Inserting the clean & dirty bushings
a. These are easier to do my hand, but you can use the floss method if needed.
b. Pinch the bushing and insert one side through the hole as much as you can.
c. Use fingers/floss to pull out the other side.
Summary of Contents for Acrobrat
Page 1: ...Quick Start Guide...
