Helpline No UK. 0871 2000 463 ROI. 01443 3940
Web Support: www.skymediauk.co.uk
9
9
Attaching / Detaching the stand and wall mounting
DETACHING THE STAND
fi g 1
fi g 2
For optimum viewing, if wall mounting the TV higher than eye level, the TV
should be tilted downwards so that the TV’s screen is ‘face on’. See fi g 1 and 2
This television requires a VESA 400 x 200 wall mount, or equivalent.
Detaching the Stand
1) Remove the screws highlighted
2) Although there are no live parts exposed when removing the stand, (in the event of wall mounting the
TV) for aesthetic purposes, included in the accessory pack is a cover plate which can be clipped into the
underside of the TV.
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
Wall mounting the TV
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes
are indicated in the picture below.
Important – If wall mounting this TV, only use the screws already provided
in the wall mounting holes. Using other screws which are longer could cause
irreparable damage to internal parts.
TV
TV
Viewing angle
Viewing angle
manual 32-28G-GB-TCDUP-UK version 1.0.indd Sec1:9
manual 32-28G-GB-TCDUP-UK version 1.0.indd Sec1:9
9/3/2010 11:30:53 AM
9/3/2010 11:30:53 AM
