Helpline No UK. 0871 2000 463 ROI. 01443 3940
Web Support: www.skymediauk.co.uk
Model Number: X23/51E-BB-FTCDUP-UK
9
9
ATTACHING/DETACHING THE STAND
Attaching the Stand
1) Insert the TV into the stand at 45 degrees
2) Twist the TV into the CLOSE
position
until
it
clicks
into
place
Attaching / detaching the stand and wall mounting
IMPORTANT - BEFORE DRILLING ANY HOLES IN THE WALL ENSURE YOU
ARE NOT DRILLING WHERE THERE COULD BE ANY ELECTRIC WIRES,
WATER OR GAS PIPES
This television requires a VESA 100 wall mount, or equivalent.
Detaching the Stand
1) To remove the base, press close and rotate 45 degrees.
2) Remove the 4 screws highlighted
Wall mounting the TV
1) Remove the four screws highlighted below.
2) The wall mount can now be easily attached to the mounting holes on the rear of the TV. These holes
are indicated in the picture below.
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
3) Remove the two screws in
the neck of the stand
UMC 23-51.indd Sec1:9
UMC 23-51.indd Sec1:9
22/12/2009 09:09:33
22/12/2009 09:09:33